Visit Company's WebsitePatterson Pump

Patterson Pump Company is recognized world wide as a manufacturer of pumps for the municipal, industrial, commercial, fire, water, wastewater, off-shore, HVAC, plumbing, power, flood control, building-trade, utility and packaged system markets.

  Vertical In-Line Water & Fire Pumps  



  V.I.P. series of vertical in-line pumps offer a simple, an economical and an efficient alternative to end suction and horizontal split case pumps in flows less than 1,500 GPM. They are easily and inexpensively installed, since they require no foundation or concrete pad. Only standard piping supports on either side of the pump are needed. Vertical in-line suction and discharge flanges are on a common center line, 180 degrees apart, for easy installation into an existing pipe line.  

  End Suction Water & Fire Pumps  
  End Suction Pumps have center line suction and discharge. They are available in capacities from 50 to 750 GPM. Each pump is hydrostatically tested to 1-1/2 times shut-off. A back pull-out design allows removal of the rotating element without disturbing suction and discharge connections. Each pump is fitted with a shaft sleeve and a self-flushing mechanical seal. Registered fits at the volute cover and volute maintain pump alignment.  

  PVT-Vertical Turbine Pumps  



  Our knowledgeable and experienced engineers have employed the latest design concepts and engineering technology to produce the Patterson Vertical Turbine Pump.

This highly efficient pump is designed to be adaptable in a variety of industrial/municipal power applications, including fire pumps. It can be staged as necessary to meet desired pressure requirements.

Lengths and construction are adaptable to the application. Special materials are available.


Visit Patterson Pump's website


| home | water | wastewater | fire protection | industrial | line card | contact | about | terms |

2003-2015 Northwestern Power Equipment Company, Inc.    All Rights Reserved


a Golnesar Design™ by BizProNet™